How to flip a sheet in Word - step-by-step methods that are understandable even for beginners. How to rotate a page in Word How to rotate one page in Word

To change the book orientation to landscape on all pages of a document, do the following.

1. Click the Page Layout tab (in Word 2016, this menu is in the Layout tab) at the top of the document.
2. In the Page Setup category, click the Orientation button.
3. To flip all pages horizontally, select “landscape”.

After selecting horizontal (landscape) orientation, all pages of the document will change their orientation. How to turn only some pages, read below.

Changing the orientation of some pages in a Word document 2007, 2010, 2013, 2016

To turn only one or more pages in a document, do the following.

1. Place the cursor at the beginning of the first character on the page you want to turn.
2. Click the Page Layout tab (in Word 2016, this menu is in the Layout tab) in the vertical menu at the top of the document.
3. In order to turn only one page, you need to create breaks in the document. Click "Breaks" and select "Next Page".
4. Click on this page of the document in the “Page Layout” menu and select “Orientation” - “Landscape”.

After performing these steps, all pages will turn over starting from the one on which you set the break.

To ensure that only this page remains upside down, place the cursor at the end of the last character of the page and make another break, as shown above.

Now, you can return the orientation of all subsequent pages. To do this, place the cursor at the very beginning of the next page and select “Page Layout” - “Orientation” - “Portrait”.

Thus, we ensured that only one page in the document has landscape orientation, and the rest are portrait.

In versions of Office 2007 and later

For one sheet

If you have any questions about Word settings, write to us. Tell us in detail what the problem is so that we can help.

How to turn a sheet of paper horizontally in the office. How to turn a page in Word? How to rotate only one sheet using Page Options

Quite often, when working with text in Microsoft Word, it becomes necessary to rotate the sheet horizontally. And how to rotate a sheet in Word? Let's figure it out.

In Microsoft Word, there are two types of sheet layout - vertical and horizontal. The vertical arrangement of the sheet is called a book spread, the horizontal one is called landscape.

The default page orientation in Word is portrait. However, when you are working with charts for example, or when you are creating something like a leaflet, you may need to rotate the sheet 90 degrees, i.e. switch to landscape sheet.

Luckily, Word makes it easy to switch to landscape mode.

If you are using Word 2003, then select the menu item File -> Page Setup.

Then, in the Page Setup dialog box, select the Margins tab.

Under the Orientation heading, click Landscape. A blue outline should appear inside the edge of the window with a picture of a leaf in a horizontal position.

If you want all sheets in your document to be in landscape orientation, then simply click the OK button at the bottom of the dialog box. If you want to apply changes only from the current sheet and to all subsequent ones, then select the Apply option to the end of the document in the Sample section, and then click OK.

In addition, you can make any pages in the middle of the document landscape. Simply select the pages you need before opening the Page Setup dialog box. And then, following the instructions described above, select the option for the selected text in the drop-down list called Apply.

Landscape sheet in Word 2007, 2010

In newer versions of Word (2007, 2010), changing the sheet orientation is even easier. Go to the Page Layout tab of the main menu, in the Page Setup group of commands, select Orientation -> Landscape. All pages of the document will change orientation.

If you need to rotate only one or several selected pages, click on the button in the lower right corner of the Page Settings group of commands.

In the MS Office text editor, page orientation is set to vertical by default. But when working with a document, you may need to learn how to flip a sheet horizontally in Word. The options for action depend on the year the program was released and the number of sheets being turned over.

To flip a sheet horizontally in Word for versions 2003 and earlier (1997 and 2000):

Advice! Also, this can be done in a document opened in markup mode. By double-clicking on the free space next to one of the rulers, open the same options window, which allows you to make a horizontal sheet.

If you don't want to expand the page horizontally in Word for the entire document, first set the text format. Then select the information you need (one sheet or several) and go to the parameters:

To turn a page horizontally in Word in Office 2007 and newer editors, use another method:

As a result of these steps, the document is completely displayed in landscape format.

If it is necessary in Word to rotate only one sheet horizontally, leaving the rest vertical, actions are performed similar to the method for the 2003 program. The difference is the location of the custom fields button on the options tab.

After you manage to expand the sheet horizontally in Word, the information on it is placed in a separate section in landscape format. On other pages - in the book. Already exposed sections allow you to rotate one page as desired by clicking anywhere on the part. The location is changed not for part of the text or document, but for the section.

If you have a question with Word settings. Tell us in detail what the problem is so that we can help.

After reading this article, you will learn how to rotate only one sheet out of all in Word.

Suppose you are writing an essay or coursework or dissertation, and you have wide tables with many columns that do not fit into the standard A-4 book format, and you need to expand one or more sheets in the middle of the work, that is, make as many sheets as landscape format so that a wide table, or drawing or graph is included. How to do this, read on...

Procedure:

1. Place the cursor on the sheet that needs to be expanded.

Open the “Page Layout” tab in Word 2010

Page Layout tab

3. Then open “Insert page and section breaks”

4. Select the “Page Breaks? Next Page” tab

Page Breaks - Next Page

1. Click “Orientation? Landscape”

Orientation - Landscape

And the entire sheet unfolds, becoming landscape.

"Orientation - Book"

And the sheet becomes standard A-4 format.

Microsoft Office. Word 2003, 2007, 2010, 2013, 2016, 2019, 365

By default, in a new Microsoft Word document, the sheet is oriented vertically (the so-called portrait page orientation). This option is most convenient for most documents. However, sometimes you need to rotate the Word page (landscape orientation). This is required, for example, for graphs. Now I will tell you how to rotate one or more pages of a document in Word.

How to rotate only one page in Word

If you need it, then all actions are performed almost the same. The only difference is in which part of the Word document to apply page rotation.

Look at the previous picture. At the very bottom of the window there is an “Apply” list, which indicates the default value: “to the entire document.” That is why all the pages were turned last time. If you want to rotate only one page of a Word document, then you need to select another item in the list, namely “to the end of the document.” This will rotate all pages to the very end.

If you don’t need to expand all the pages, but only one, then the operation is performed in a similar way. The result of turning one page out of three is shown in the figure below.

website_eefbbe2ca6707fc7cc2a768090ade72f

If you think about it, there are only three options for turning pages in a document:

• All pages are rotated, starting from the first
• Only the last page is expanded
• One or more pages are rotated in the middle of the document

Obviously, the last case is the general one. Given the above, it should be quite clear to you how Word rotates only one page. If it is not very clear, then watch the instructional video, in which the operation of turning Word pages is shown step by step.

The easiest and fastest way to make landscape orientation in the program

Let's consider the process of changing the position using the example of Word 2013, a common updated word processor. To make a landscape view in Word, follow the instructions:

• Find the tab for page layout on the toolbar;
• the change occurs by clicking on the drop-down list in the “Orientation” field. Select the landscape version of the page. After completing this action, everything in the open file will become landscape;

Fig 1. In the orientation field, select portrait or landscape

You can also set landscape orientation in Word using the Page Options window. Click on the options icon as shown in the image below:

Fig 2. Second method of change, through the parameters window

A window will open for detailed editing of the open file format.

Fig 3. Editing the format in the page settings

The following sheet parameters can be changed in the window: position of pages, difference in headers and footers, width and height of margins, beginning and end of sections and paper size. To flip a sheet horizontally in Word, select landscape orientation.

Flipping a sheet horizontally is one of the most common tasks when typing. This task faces users in a variety of situations. For example, when working with large tables or when creating a booklet. Therefore, it is very important to know how to flip a sheet in Word. In this material we will talk about how this is done in Word 2003, 2007, 2010, 2013 and 2016.

How to Flip a Sheet in Word 2007, 2010, 2013 and 2016

In order to flip a sheet horizontally in Word 2007, 2010, 2013 and 2016, you only need to do a couple of steps. First, you should go to the Page Layout tab. This tab contains all the functions of the Word text editor that are related to the appearance of the sheet. The “Orientation” button is responsible for turning the sheet over. Click on this button and select the “Landscape” option from the menu that opens. This way you can flip all the sheets horizontally in your Word document.

If you want to flip only one sheet horizontally in a Word document, then this will be a little more difficult. First, you need to enable the display of hidden characters. To do this, go to the “Home” tab and click on the corresponding button there (screenshot below).

Once the display of hidden characters is enabled, you need to place the section breaks correctly. In order to flip one sheet horizontally, you need to set a section break before and after that sheet. This is done as follows. Place the cursor at the end of the sheet that comes before the sheet you want to flip. After that, open the “Page Layout” tab, click on the “Breaks” button and select the “Next Page” option. This way you will set a section break before the desired sheet.

Next, you need to place the cursor at the end of the sheet that you want to turn over and repeat the procedure (click on the “Breaks” button again and select “Next Page”). As a result, you should have two section breaks. One in front of the sheet and one at the end. Now place the cursor on the sheet that you want to flip, go to the “Page Layout” tab and select “Page Orientation - Landscape”.

If everything was done correctly, then the sheet you need should turn over horizontally. If you do not get the expected result, then check how the section breaks were placed.

How to flip a sheet horizontally in Word

By default, all sheets in Word have a vertical position. But during work, the user may need to rotate the sheet to a horizontal position. Below we will discuss methods for rotating both one sheet and the entire document.

1 First, let's look at the method of rotating a sheet in Microsoft Word 2003. If you intend to rotate all sheets of a document to a horizontal position, this operation can be accomplished in a couple of clicks. After launching the program, find the “File” tab in the top panel.

2 If the submenu is not completely displayed, expand it using the corresponding “Expand” button. Next, find the “Page Options” item.

3 A window will open allowing you to customize the document. Open the “Margins” tab and pay attention to the “Orientation” block. In it you need to select the “Landscape” position. With its help, all sheets of the document will take a horizontal position. Then we confirm our actions by pressing the “Ok” button. If you need to correct your changes, switch to Portrait view. All sheets of the document will immediately take a vertical position.

4 This method is relevant only if it is necessary to rotate all the sheets. But in some cases it is necessary to change the position of only one or several sheets. A similar option is provided in Word 2003, and is implemented in almost the same way. Select the text on those pages on which you plan to change the position of the sheet.

5 After completing this action, open the “File” tab and also find the “Page Setup” item.

6 Select the Fields tab and change the view to Landscape. The next steps are slightly different from the previous ones: at the bottom of the window, find the “Sample” button. And in the “Apply” column, select “To selected text”. After confirmation, only those sheets whose text has been selected will be changed.

7 The versions of Word 2007 and Word 2010 have a similar algorithm of actions and the most lightweight. In order to change the position of sheets throughout the document, just click the “Page Layout” tab and select the “Orientation” block in the submenu that appears.

8 After clicking it, a small submenu will open with the items “Portrait” and “Landscape”. Select the bottom option, after which all sheets in the document will take on a horizontal view.

9 To apply the change to only one or more sheets, select the text on the required pages. Next, open the “Page Layout” tab.

10 After completing these steps, the next steps will be slightly different. In the “Page Options” block, find the small button located at the very bottom right.

11 A window with parameters will open. Select the “Margins” tab and find the “Orientation” block. Here you need to set the view to “Landscape”.

12 All that remains is to change the last parameter. At the very bottom, in the “Apply” item, change the value to “To selected text”.

Using the above methods, you can easily rotate a page in Word. As a rule, these operations do not take much time. Regardless of the versions installed on users' computers, the entire process takes only a few seconds.

Useful materials:

Most users who work with the Word text editor know how to change the sheet orientation from vertical to horizontal and vice versa. This does not cause any problems, since all you need to do is press one button.

But when it becomes necessary to expand only one sheet horizontally, most users encounter difficulties. In this article we will look at two ways to do this. The article will be useful to users of modern versions of Word, such as Word 2007, 2010, 2013 and 2016.

How to rotate just one sheet using section breaks

The first way is to use section breaks. In order to expand horizontally only one sheet, you need to separate this sheet from the rest of the document using section breaks. One gap should be placed before the sheet and one gap after the sheet. After this, this sheet can be expanded horizontally and the rest of the document will not be affected.

So, let's say you have a sheet that you want to expand horizontally. To do this, place the cursor immediately above this sheet, that is, at the end of the previous sheet. After that, go to the “Page Layout” tab, click on the “Breaks” button and select “Next Pages”. This way you will set a section break before the sheet that needs to be expanded horizontally.

After this, place the cursor at the end of the sheet that you want to expand horizontally, and again click on the “Breaks” button and select “Next Page”. This will place the section breaks above and below the desired sheet.

To make sure that the breaks are set in the right places, go to the “Home” tab and click on the “Show all characters” button. This will allow you to see the placement of section breaks and correct them if they were placed incorrectly.

In the screenshot below you can see what a section break looks like at the end of the page.

After setting the section breaks in the desired positions, you can begin to rotate the sheet into a horizontal orientation. To do this, place the cursor on the sheet that you want to expand horizontally, go to the “Layout” tab and change the sheet orientation from “Portrait” to “Landscape”.

If the gaps were placed correctly, then only one sheet should unfold into a horizontal orientation, while the rest should remain vertical.

How to rotate only one sheet using Page Options

You can also expand only one sheet horizontally through the Page Setup window. This method is a little more complicated, but it can also be used.

To begin, you need to position the cursor one page above the sheet that you want to expand horizontally. After this, you need to open the “Page Layout” tab and click on the small “Page Options” button. The location of this button is marked in the screenshot below.

This will open the Page Setup window. Here you need to select the “Landscape” option, apply this option “To the end of the document” and save the settings with the “OK” button.

As a result, all pages below the selected one will be rotated to horizontal orientation. In order for only one sheet to remain in horizontal orientation, you need to move the cursor one page down and repeat the procedure. Only this time you need to select the “Portrait” option.

If everything is done correctly, you will get one sheet in horizontal orientation, and the rest in vertical orientation.

By default, when creating a new document in Word, the sheet is positioned vertically (portrait orientation). Flipping a sheet into a horizontal (landscape) view is often necessary when you need to create a presentation or when working with wide tables, when all the columns do not fit the width of the page.

In this article you will learn how to flip a sheet horizontally (landscape orientation) in Word.

Flip a sheet in Word 2003

Changing the orientation of all pages of a document

In order to turn all pages in Word 2003, you need to do the following.

1. Click the "File" button in the upper left corner and go to "Page Options."
2. In the window that opens, in the first tab “Fields”, find the “Orientation” setting.
3. Select the required page type - portrait or landscape - and click OK.

Changing the orientation of multiple document pages

In order to flip horizontally only a few pages of a document in Word 2003, do the following.

1. Highlight the text on the required pages.
2. Click the "File" button in the upper left corner and go to the "Page Options" menu.
3. Specify the required page orientation and click “Apply to selected text” at the bottom. Click OK.

This way, the orientation will change to horizontal (landscape) only on those pages that have been selected.

Flip sheet in Word 2007, 2010, 2013, 2016

Change the orientation of all pages in a Word 2007, Word 2010 document

To change the book orientation to landscape on all pages of a document, do the following.

1. Click the Page Layout tab (in Word 2016, this menu is in the Layout tab) at the top of the document.
2. In the Page Setup category, click the Orientation button.
3. To flip all pages horizontally, select “landscape”.

After selecting horizontal (landscape) orientation, all pages of the document will change their orientation. How to turn only some pages, read below.

Changing the orientation of some pages in a Word document 2007, 2010, 2013, 2016

To turn only one or more pages in a document, do the following.

1. Place the cursor at the beginning of the first character on the page you want to turn.
2. Click the Page Layout tab (in Word 2016, this menu is in the Layout tab) in the vertical menu at the top of the document.
3. In order to turn only one page, you need to create breaks in the document. Click "Breaks" and select "Next Page".
4. Click on this page of the document in the “Page Layout” menu and select “Orientation” - “Landscape”.

After performing these steps, all pages will turn over starting from the one on which you set the break.

To ensure that only this page remains upside down, place the cursor at the end of the last character of the page and make another break, as shown above.

Now, you can return the orientation of all subsequent pages. To do this, place the cursor at the very beginning of the next page and select “Page Layout” - “Orientation” - “Portrait”.

Thus, we ensured that only one page in the document has landscape orientation, and the rest are portrait.

If you use the Word program quite often for work, then you may need to turn the page horizontally. When you start the program, the document is always positioned vertically. In this short article we will look at how to make a page completely and partially horizontal.

Making the entire page horizontal

We perform the following actions:

• Go to the “Page Layout” tab and we see the “Orientation” button here. The standard here is portrait orientation.
• Click on landscape orientation, and all our sheets are flipped to a horizontal position.

This manual works in Word 2007 and higher.

Making just one page horizontal

As you can see, making the entire document horizontal was a snap, but there are times when part of the document requires using both portrait and landscape orientation. Usually this has to be used when a person writes all sorts of manuals, books, etc.

In order to make one or more pages horizontal, we need:

1. Again go to the “Page Layout” section.
2. We come here and look in the upper right corner. There should be a “Page Options” button. Click on it, and an additional menu opens in front of you, which prompts you to select the type of writing - vertical (portrait) or horizontal (landscape). Immediately you can choose what to apply to - to the entire document, or to its end.
3. We select the item to the end of the document, and in Word we get one landscape sheet.

If you finish working on a landscape sheet, and you need the next sheet to be portrait, we simply do all the same work, only set the “portrait” option in the settings, not landscape. That's all. This manual definitely works in the version of Word 2007, but it will probably also work for older versions of the program.

This is interesting!
You often need to put stress on words, so be sure to learn how to put stress in Word.

It is also very useful to know about inserting a dash, some also call it a long hyphen. In the article we will talk about inserting a mid and em dash, as well as a hyphen.

To place large figures, diagrams or tables, you often need rotate page in word. Let's change the page orientation for the paragraph Paragraph and the spacing between lines.

There are several ways to change the page orientation.

1st method:

Select a fragment of any text for which you should change page orientation.
Execute the special command File/Page Setup.

On the Paper Size tab: set the page orientation to landscape, and in the Apply field, select To selected text.
Click OK.

Switch to Normal viewing mode. When the page orientation changes (as, for example, when the number of columns changes), a new section begins, and a section break appears at this point. Remove these breaks and your text will return to its original form.

ATTENTION! When you delete a section break, the current section takes on the formatting settings of the next section.

2nd method:

If pages in landscape orientation must be filled completely, and you do not know where they will end, then it is advisable to use the following method:

Place the input cursor at the beginning of the fragment for which you want to change the page orientation (at the beginning of the Paragraph and line spacing heading).
Run this command: File/Page Settings.

On the Paper Size tab: set the page orientation to landscape, in the Apply field, select To the end of the document.
Click OK. All text, starting with this paragraph, is now located on pages in landscape orientation.

Let's return the pages to portrait orientation, starting with the third. To do this, place the input cursor at the beginning of it, and then do the same operations (only on the Paper Size tab, set portrait orientation and in the Apply field, do not forget to select the Until the end of the document mode!). The page orientation has returned to its original orientation.

Finally, to make our text seem continuous, remove the paragraph indent at the beginning of the third page.

Flipping a sheet horizontally is one of the most common tasks when typing. This task faces users in a variety of situations. For example, when working with large tables or when . Therefore, it is very important to know how to flip a sheet in Word. In this material we will talk about how this is done in Word 2003, 2007, 2010, 2013 and 2016.

How to Flip a Sheet in Word 2007, 2010, 2013 and 2016

In order to flip a sheet horizontally in Word 2007, 2010, 2013 and 2016, you only need to do a couple of steps. First, you should go to the Page Layout tab. This tab contains all the functions of the Word text editor that are related to the appearance of the sheet. The “Orientation” button is responsible for turning the sheet over. Click on this button and select the “Landscape” option in the menu that opens. This way you can flip all the sheets horizontally in your Word document.

If you want to flip only one sheet horizontally in a Word document, then this will be a little more difficult. To begin with, you you need to enable display of hidden characters. To do this, go to the “Home” tab and click on the corresponding button there (screenshot below).

Once the display of hidden characters is enabled, you need to place the section breaks correctly. In order to flip one sheet horizontally, you need to set a section break before and after that sheet. This is done as follows. Place the cursor at the end of the sheet that comes before the sheet you want to flip. After that open the “Page Layout” tab, click on the “Breaks” button and select the “Next Page” option. This way you will set a section break before the desired sheet.

Next, you need to place the cursor at the end of the sheet that you want to turn over and repeat the procedure (click on the “Breaks” button again and select “Next Page”). As a result, you should have two section breaks. One in front of the sheet and one at the end. Now place the cursor on the sheet you want to flip, go to the "Page Layout" tab and select "Page Orientation - Landscape".

If everything was done correctly, then the sheet you need should turn over horizontally. If you do not get the expected result, then check how the section breaks were placed.

How to flip a sheet in Word 2003

If you use the Word 2003 text editor, then the instructions described above will not help you. You can flip the sheet in a different way instead. For this open the File menu and go to Page Setup.

After the sheet settings window appears, select the Landscape orientation option.

Then save the settings by clicking on the “Ok” button.

07.03.2018

Word is a popular text editor, the most popular application in the Microsoft Office suite. While working, sometimes it becomes necessary to turn the page horizontally, that is, switch from portrait to landscape orientation.

Changing page orientation in Word

In Word, by default, the page is placed in portrait or portrait orientation, that is, vertically. But, for example, it was necessary to make a large table. How to turn a sheet horizontally?

Method 1: Word 2003 and earlier versions, all text

Flip the page horizontally in older versions of Word.

Method 2: Word 2003 and earlier versions, part of the text

Rotate selected text in Word 2003 and earlier versions.

If you need to turn over not the entire document, but only one or several pages, then do this:

Method 3: Word 2007 and later versions, all text

Since the 2007 version, the Word interface has changed significantly. Here we adhere to a different algorithm of actions.

Method 4: Word 2007 and later versions, part of the text

If you need to flip only part of the document, then we proceed by analogy with older versions of a text editor.

Method 5: Keyboard shortcuts

You can change the position of the sheet using keyboard hot keys.

As you can see, there is nothing complicated about changing the sheet orientation in Word. This text editor is distinguished by its ease of use and will not create insoluble problems for novice users.