Setting up a Wi-Fi router from Rostelecom - step-by-step instructions. How to enter modem settings from Rostelecom: step-by-step instructions Login to the address 192.168 1.1

http://192.168.1.1 is an entrance to the router’s personal account via a web interface from manufacturers such as Asus, Zyxel Keenetic, Netgear, Mercusys. Also, using this IP address, you can go into the wi-fi settings of branded routers or modems from some providers, for example, Rostelecom or Beeline. Accordingly, to log into the router via the web interface, you need to enter https://192.168.1.1 into the address bar of the browser. But to gain access to the settings, this is not enough, since you also need to log in to your personal account under the administrator account. For this, a login and password are used, which for most models by default is “admin-admin”.

Errors when logging into router via 192.168.1.1

Since you came to this article, it means that you obviously have problems with the fact that you cannot log into your router. Well, I'll try to help you. But before looking for errors related to setting up a router via the 192.168.1.1 web interface, let's figure out step by step how to properly connect it to a computer. Perhaps you did it wrong, and the devices simply do not see each other. And it is precisely because of this that you cannot enter his personal account.

Do not confuse the LAN and WAN ports - LAN is used to connect devices, including a computer, to the router. In the WAN we only insert the cable from the Internet provider. They are often painted in different colors.

If you have a laptop, it is easier to log into your personal account directly via wifi. As soon as you plug in the router, it will start sending out a wireless signal. Its name, as well as the password for connection, can be found on the label that is located under the case for each model.

Sometimes this network is not secure at all by default. Then you just need to join it and then log in to the router.

Login address to the web interface of the router’s personal account http://192.168.1.1

Next, let’s ask ourselves a question: is the router, the personal account of which you need to log into through the web interface, completely new or already used? This is necessary to understand whether changes were made to the standard IP address 192.168.1.1 to enter the settings. Otherwise, it may look like 192.168.1.4, 192.168.1.77, or any other value. For many TP-Link models, the personal account is located on a different HTML page -.

By the way, the same applies to the login-password pair. From the factory this is usually “admin-admin”. It could have been replaced by a more reliable one by the previous owner.

To find out exactly what your router's default web interface address is, look at the sticker located on the bottom of its case. This source of information will necessarily indicate its IP or web address in fine print. In fact, it is also an html page on which the entrance to the router’s personal account is located. For manufacturers such as Asus, Netgear, Zyxel, Rostelecom, it will look like “http://192.168.1.1”. There are other options, for example, logging into your Huawei personal account, and Xiaomi. However, they are rare and we talk about them directly in reviews of specific devices.

In some models, instead of an IP address, a certain domain can also be specified for access to the administrator section. It already replaces this IP address at the router software level. “Scientifically” it is called a hostname.

• So, for example, Zyxel Keenetic routers can be accessed either at 192.168.1.1 or
• From Asus -
• And NetGear has routerlogin.net

How to log into the router 192.168.1.1 – login and password admin-admin

Now, to go into the settings, launch the browser and type in the ip address “ 192.168.1.1 “. A window will open for entering your login and password to log into the router.

If the router is new, then there is nothing easier than finding out this data. We take the device, turn it upside down again and see that same sticker. On it, in addition to the IP address and network name, which we have already looked for, in small print there are values ​​​​for logging into the web interface, set by default - Login / Password. In most cases this is admin/admin.

We are trying to use this data to log into the router’s personal account.

If the pair indicated on the case for authorization is not suitable, you can reset the settings. But as you understand, at the same time all the network configurations and Internet connections previously entered into it are lost. There are times when you want to save them, but don’t remember the password to access them. In this case, I strongly recommend reading the article about it - I hope you will find a suitable method there.

To return to the factory state, look for the “Reset” button on the case. It is usually small and recessed to prevent accidental pressing. Perhaps someone in the store has already tested the router and set their own password to enter the web interface from the page http://192.168.1.1.

Be careful - before resetting, make sure that you have written down all the data for connecting to your provider somewhere

1. Plug the router's power adapter cord into a power outlet.
2. Take something like a pin (a pen or pencil may not fit into the hole).
3. Press the sharp end on this button and hold for 10-15 seconds.

Sometimes it happens that the reset button is combined with WPS and is not recessed. Then just press it and hold it for the same 10-15 seconds until the lights blink.

After this, the router will reboot and return all parameters to default values. All we have to do is use 192.168.1.1 as the address plus the same login and password from the sticker for authorization in the admin web interface.

If you know the login and password for your personal account (admin-admin or another), you type the router IP correctly, but the login page to the web interface of the settings panel does not open, then check the network connection configuration on your computer.

Setting up a computer to log into the router

In order to be guaranteed to access the router’s settings, you need to make changes to the computer’s network configurations in accordance with its IP address 192.168.1.1. Otherwise, logging into your personal account will be impossible.

Automatic

To get into these configurations, we follow the chain:

1. “Start – Control Panel – Network and Internet – Network and Sharing Center” for Windows 7. Or right-click on “Start” and then “Network Connections – Network Center” if you have Windows 10
2. Next, in the left menu, select “Change adapter settings.”
3. Find the active “Local Area Connection”, right-click on it and select “Properties”
4. Select “Internet Protocol Version 4”
5. We check the box to automatically receive IP and DNS - in this case, the router will assign them to the computer independently.

Manual configuration 192.168.1.1

If you can’t log into the router’s admin panel with these settings, check the boxes for manually entering parameters. The PC must have an IP from the same subnet as the router. That is, if the address “192.168.1.1” is indicated on the router label, then the first three values ​​on the computer should be identical – 192.168.1.XXX. The last digit refers directly to this client and can be anything up to 254, except “1”. For example, for three different computers you can specify “0”, “3” or “10” - I just took them “out of the blue”.

That is, in practice we write down the following data:

After all this, save with the “OK” button.

Invalid personal account address – 192.168.l.l, 192.168.l.0 or www 192.168.1.1 net ru

If you did everything correctly according to the instructions, but this does not help you enter the settings of your wifi router’s personal account, then we will also exclude the most ridiculous mistakes that users sometimes make.

• The main thing when entering an address is not to automatically confuse it and write 192.168.l.l (or 192.168.l.l0, 192.168.l.3) due to the similarity of the spelling of the letter L with the number 1 - a very common inaccuracy.
• Another common mistake is when commas are used instead of periods in the address.
• The same applies to the computer's IP address if you enter it manually. You need to specify not 192.168.L.2, but 192.168.1.2
• Finally, someone adds the ending NET, RU or COM to the end of the address. Another spelling option is with HTML, 192.168.1.1.html. You don't need to do this either.
• Just as you should not write it with the prefix “www”.

Read more about this in our separate article.

This article will be useful for those who want to go into the settings of their router. Since most routers use the address 192.168.1.1 to log into the system, this guide will be universal and probably very popular. Regardless of what router we have and what parameters we want to change, we first need to log into the settings. Access the control panel. And you can do this at the address, or.

On routers from such popular companies as TP-Link, ASUS, ZyXEL, D-Link, Netis, Tenda, Totolink - everything is approximately the same. In any case, you can always find out the factory address. For example, look at it on the device case, or in the connection properties on the computer. We will return to this later.

If you don’t understand what this article is about, what these addresses are for, and what we’ll do in general, then I’ll try to explain. If you are in the know, then you don’t have to read what is written under the spoiler.

On Huawei it is usually 192.168.100.1. In the article I will show one method using which you can open a page with the settings of absolutely any router or modem. Even if you don't know his address. After all, it can be changed and not correspond to the factory one. Which is indicated on the device.

How to access 192.168.1.1?

On device (computer, laptop, smartphone, tablet) which is connected to a router or modem using a network cable, or a Wi-Fi network, you need to open a browser. Any will do. But I advise you to use the standard one. I will log into Windows 10 through Microsoft Edge.

In the line where site addresses are displayed, enter the address. Or http://192.168.1.1. To go, press Enter.

And if you entered the address correctly, the device is connected to the router and configured, then your router’s page will open.

At this stage, many people encounter a problem when the router settings page for some reason simply does not open. If this is your case, then see the solutions at the end of this article.

If a search engine page opens, make sure that you do not enter the address in the search bar. Or better yet, open it through a different browser.

I have an ASUS router and it asks for a username (Login) and password (Password) for authorization.

We indicate this data and get into the router’s personal account. Yes, many people call the web interface that way, but it’s not entirely correct. Your personal account is with the provider.

Another simple, universal and working method. On the computer, go to Explorer, to the “Network” tab. Our router should be displayed there. Right-click on it and select “View device web page.”

A browser will open with our router page. There is no need to manually search for anything, enter anything, etc.

Let's take a closer look at the authorization process. Many people in the comments ask about this. Not everyone understands what needs to be entered when the router asks for a login and password. And where can I get the login information for my router account?

Login to 192.168.1.1 via login and password (admin/admin)

Please note that the router does not always ask for a login and password. I will enter at factory settings. And if it asks, this does not mean that the default is necessarily admin.

• On some routers, there is no authorization at the factory settings. The router system immediately opens. A window may appear asking you to set a username and password. And if not, then this can be done in the settings. I wrote about this in the article: .
• If a request for a username and password still appears, then they should be indicated on the body of the router itself.

In my experience:

• On TP-Link and ASUS routers, the default is always admin/admin. The address is usually 192.168.1.1.
• On D-Link it can also be admin. Or the username is admin, and leave the password field empty.
• On ZyXEL, the password is not set at the factory settings.
• Netis – no authorization. If the login and password were not set by the user himself.
• On Tenda, the web interface immediately opens. The password can be set manually.
• Totolink – admin and admin.

Either way, a window just pops up asking for a username and password. It may look a little different. We indicate them correctly and go to the web interface. If not, an error will appear. If you change and forget this password, then reset the router settings to factory settings.

I can’t log into the router, what should I do?

It's not uncommon to have problems. There may be many reasons why you cannot access 192.168.1.1.

I'll tell you about the solution to the most popular ones.

If another address is indicated there, then go to it.

If all else fails, reset your router to factory settings. But I can’t guarantee that it will help, you have to try. It happens that the router is simply broken, so the settings do not open.

Rostelecom routers are configured in the same way as most similar devices. The sequence of actions required for connection, authorization and changing parameters will be discussed in detail below.

Let's start with the basics. To enter the router settings, you need to connect it to the power supply and wait until the equipment boots up. The next important point is the connection method. You can access the router control panel in two ways - via cable or WI-FI. In both cases, the possibilities for changing the configuration are almost the same, with the exception that you cannot reflash the router via WI-FI.

In the case of a wireless connection, you first need to find a newly created WI-FI network, which by default has a name similar to the router model; entering a password will not be required if no one has assigned it before.

When pairing a PC and a router via cable, you must insert one of the connectors into the network card connector on the computer, and the other into the LAN port of the router.

Further actions are no different both in the case of configuration via wire and without it.

• We launch the program to view Internet pages (to enter the settings of the Rostelecom router, any browser, for example, Opera, will do). It doesn’t matter if you log in from a smartphone or PC.
• In the address bar, enter the IP of the router, for example, 192.168.1.1 or 192.168.0.1.
• If the address is correct, an authorization form will appear in which we enter the username and password to log into the Rostelecom router (usually admin/admin).

In most cases, the above values ​​will be correct and once entered, the device control panel status page will open. If the parameters were changed for some reason, then when logging into the admin panel of the router, a number of problems may arise, the solution to which is described below.

How to find out the IP address of a router

One of the most common login errors is when the page not found message is displayed at the address specified in the browser line. A common reason for this message to appear is an incorrectly entered IP. The easiest way to recognize it is by examining the sticker on the bottom panel of the device; the password and login for logging into the router are also indicated there. If for some reason the sticker is missing or it is impossible to make out what is written on it, the address is written in the operating instructions, as well as in a copy of the Rostelecom agreement held by the subscriber.

There are situations when none of the above exists. In this case, you should contact the provider's technical support. Over the phone, a company employee will tell you the sequence of actions necessary to find out the address of the Rostelecom router, its login and password.

Common causes of control panel login errors and how to fix them

If you start the command line (key combination Win + R, in the field that opens, write cmd and press enter) and type ipconfig in it, among other things, there will be an item - the main gateway. The numerical value opposite it is the address of the router to which the PC is directly connected.

For Windows devices, a connection error may be displayed due to the lack of a network card driver. In this situation, the connection icon in the notification panel is crossed out with a red cross, and when you hover the mouse cursor over it, a message is displayed indicating that the network cable is not connected. The problem can be solved by installing the driver (if this is a temporary glitch, just restart the PC).

Internet Protocol version 4 settings should be set to automatically obtain the IP address and DNS server addresses. This parameter is checked in the Network Control Center -> change adapter parameters -> right-click on the cable connection -> properties -> right-click on the IPv4 protocol -> properties. In the window that opens, you need to set the switches to automatically obtain addresses.

Resetting the router to default settings

If you still cannot log into the Rostelecom router, you need to reset its configuration to its factory state. This procedure is quite simple, but the process may vary depending on the specific model. Most devices have a reset button - Reset, WPS/Reset or the like. All you need to do is press and hold the button for 10-15 seconds, after which the device will reboot with default settings.

On some modifications, this key is hidden and can only be pressed with a thin, sharp object. The principle is the same - hold it for 15 seconds and wait until it reboots. It is important that you do not turn off the power during the reset process.

After successfully installing the factory settings, the IP address of the Rostelecom router will correspond to that indicated on the label below or in the operating instructions. How to log into the router’s web interface was described above. Simply enter the address in the browser and then provide your authorization details.

Firmware for Rostelecom router to the latest version

The procedure should be performed only when pairing a PC and a Rostelecom router via cable. The sequence of actions is as follows:

• Download the file with the latest firmware version from the manufacturer’s official website (on some models this is not necessary, the file will be downloaded and installed during the update through the admin panel interface).
• Let's go to router management.
• We are looking for the system tools tab or something similar.
• Go to the software update subsection.
• On the page that opens, you will be asked to specify the previously downloaded file, select it and click the “Update” button.

The system will install the downloaded file, reboot, after which the Rostelecom device will operate under the latest firmware version.

“Why can’t I log into the router at http://192.168.1.1, but the Internet works on Windows 7 or 10”, “What should I do if my personal account at admin-admin site 192.168.1.1 does not open and I can’t get to the menu modem settings". These and similar questions today are full of letters that come to our technical support via Yandex from users of Zyxel Keenetic, Asus, Rostelecom, Beeline, MTS and some TP-Link routers. Why does such a problem arise with logging into the wifi router system settings via the web interface from a computer or phone using a standard login and password? How to open a personal account? In this article I decided to fully reveal her solution.

Login to router 192.168.1.1 does not open due to connection to the wrong wifi network

So, the first reason why it is impossible to log into the router at http://192.168.1.1 (or https://192.168.1.1) is that you are connected to the wrong network. For example, you have several sources of wifi signal - , or plus. And you have in your computer’s memory the data for connecting to each of them, but after waking up from sleep mode, the PC chose the wrong network.

It also often happens that neighboring apartments have routers from the same manufacturer. And by default, their signals are not password protected and have similar names. By mistake, you can easily connect to someone else’s network instead of your own. Although, today I can hardly imagine anyone working with password-free wifi, so this option is more like a fantasy.

The Asus, Zyxel Keenetic and Rostelecom router does not enter settings 192.168.1.1 due to an incorrect address

But the most common reason why the browser does not enter the router settings is the incorrectly entered address 192.168.1.1. For manufactured routers, as well as branded devices, there may be three types of errors:

• This model has an address other than 192.168.1.1
• incorrectly entered values ​​– 192.168.l.l
• the address has been changed by the previous owner

Invalid modem login address

First of all, you need to make sure that the entry to the settings is located exactly at 192.168.1.1. It is used by default for Asus, Zyxel Keenetic and some TP-Link routers and modems. It is also relevant for branded routers from the Rostelecom provider. To clarify this point, look at the sticker located on the bottom of the device. It shows the correct value. It can be either an IP, like Asus:

Either a web address or hostname. This is done in all Kinetics.

If you look at TP-Link models, you will most often see 192.168.0.1 or
(). But you also come across 192.168.1.1, as for example on

Spelling error

Another error due to which the browser does not enter the 192.168.1.1 settings is the incorrect spelling of the IP address. Thus, inexperienced users confuse the letter “l” with the number “1”. Externally, on a computer screen, they are indeed very similar. The result is “http://192.168.l.l” - but it is clear that this is fundamentally incorrect. And you won’t be able to access any router settings using this “address”.

The same applies to any prefixes, such as HTTP or endings - RU, NET, COM, HTML:

Once again, the login address should look like

No spaces, dashes or anything else. Otherwise, you will always end up in search results.

The default address has been changed

If you are not setting up a new router that you just took out of the box, but an already used one. Then there is a possibility that its default IP address 192.168.1.1 was changed to another during the previous configuration. For example, on 192.168.2.1, 192.168.3.1, 192.168.4.1, 192.168.5.1 and so on.

Then the easiest thing to do is reset to return it to . If there is some important data in the parameters and you don’t want to lose it, then it’s very easy to find out its current value. You need to open the network adapter status information. How to do this is described in detail in our article about

Errors in source settings 192.168.1.1 on the computer

Finally, another reason why the website http://192.168.1.1 does not open on a computer or laptop is incorrect network adapter settings. Typically, a router is installed by those users who previously had a PC connected to the Internet via cable. Accordingly, it was directly plugged into the network card, and some data may have been specified in its parameters. But now the router has taken over its function of connecting to the provider, and accordingly they no longer work, but only interfere.

To go to the network adapter settings, you need to open the “Network and Sharing Center”

Here go to “Change adapter settings”

And right-click on your connection. If you have wifi, then select “Wireless network”. If the computer is connected to the router with a cable, then “Ethernet”. And in the drop-down menu go to “Properties”

Here we click on “Internet Protocol Version 4” and check the “Obtain automatically” IP address and DNS server checkboxes.

We save the changes and try again to type the site address “http://192.168.1.1”. I'm sure everything will work out this time!

Login and password Admin-Admin or Password for 192.168.1.1 are not suitable

Finally, let’s look at the case when the address is opened, but it is not possible to enter the settings when using the “Admin-Admin” login-password pair. Yes, indeed, it is universal for most router models, such as Asus, TP-Link or D-Link. However, there are exceptions. For example, “1234” can be used as a password, as is done in .

But for Zyxel Keenetic, Netis, Mercusys and Tenda, the password is set at the first login. This means that if you don’t know him, then logging into the router is forever closed to you. In this case, the only solution is to reset the router settings to install it again. I also present several working methods in a separate article. Read it, maybe some option will help you.

The more people use broadband Internet access, the more often the question arises - how to access the Wi-Fi router settings?! Many people even know that IP is used to enter the router settings 192.168.1.1 , or less often - . And yet, with access to the web configurator, some incomprehensible stories constantly arise, forcing the user to surf the Internet in search of an answer - how to log in to 192.168.1.1 to configure the router. This instruction will fully answer all your questions and will help you understand all the basic intricacies associated with accessing the configuration parameters of a wireless router.

What we're going to talk? To begin with, I will conduct a small educational program and tell you briefly what these addresses 192.168.0.1 and 192.168.1.1 are, why they are needed on the home network, where they need to be entered to go to the page with the router settings and what to do if this can't do it?!

Most often, such questions are of interest to those who have just connected to the Internet, bought a Wi-Fi router for this, and then don’t know what to do with all this stuff! The way modern network devices are designed is that before you put it on the network, you need to change the basic configuration parameters to those recommended by the provider to which you are connected. You will also have to open the router settings if the Internet stops working due to the settings being lost, or when you need to change the WiFi password or some other options. Moreover, no matter what router you use - Asus, Zyxel Keenetic, Tp-Link, D-Link, NetGear, Trendnet, Tenda, Linksys or something else - the process of logging into the router’s web interface via IP address 192.168.1.1 (or any other) is almost the same everywhere and is no different!

IP 192.168.1.1 - what is this address and how to use it

Any modern Internet access device, be it an ADSL modem, WiFi router or xPON optical terminal, is a whole mini-computer! It has its own processor and RAM, and is controlled by a special operating system. Therefore, you should not be surprised by such an abundance of various settings and functions that modern routers are endowed with. Two networks are usually connected to this mini-computer:

1. WAN or Wide Area Network- This is an external network that comes with the provider's cable.
2. LAN or Local Area Network- this is your home network, which will include a computer, laptop, phones, tablets and Smart TV.

So 192.168.1.1 is the IP address of the router on the local network, using which you can enter its settings. The same IP is the gateway for the home network.

Recently, manufacturers have begun to assign domain names on the local network to ordinary home Wi-Fi routers. The most striking examples:

Asus - asusrouter.com TP-Link - tpinklogin.net, tplinkwifi.net or tplinkmodem.net Zyxel Keenetic - my.keenetic.net NetGear - routerlogin.net Rostelecom routers - http://rt

That is, in the address bar of your web browser, instead of the IP address 192.168.1.1, you need to enter a symbolic name and press the “Enter” button.

How to find out the IP address of a WiFi router

As I said above, to organize a home network and access management, each router has its own local IP address, through which it will be accessible to all clients. It will also be indicated as a gateway for all gadgets connected to it. How to find out the router address? Yes, very simple. We take it in our hands and turn it over. As an example, I’ll show you a sticker on the Netis DL4320 modem:

On the back of the case there will be a sticker on which all the basic information about the network device is written - manufacturer, model, serial number. Also, in a separate area, the IP address of the router will be registered - 192.168.1.1, 192.168.0.1 or some other. It is this set of numbers that will need to be entered in the address bar of the browser.

If instead of IP a symbolic address is registered, then you will have to enter it. Example - TP-Link TL-MR4320 WiFi router:

By the way, the login and password for logging into the router via 192.168.1.1 are written there. Typically this is the username − admin and password - admin.

If there is suddenly no sticker on the device, then use the instructions from the manufacturer.

How to enter 192.168.1.1 into the router settings

Let's take a step-by-step look at how to properly connect and log into the router settings via 192.168.1.1 for beginners!

Step 1. We start with the fact that you first need to correctly connect your computer or laptop to it, using which we will further configure the router:

It is best to do this through the supplied LAN cable. You can see the connection diagram in the figure. That is, we connect one end of it to the network card of a PC or laptop, and plug the other end into the LAN port on the router. In general, you can log in to 192.168.1.1 via WiFi, but to do this you either need to know the password for its Wi-Fi, or be able to click on . on the router, then connect within two minutes.

As soon as you connect to a network device, the Windows operating system can automatically set the connection status to “Restricted” or “No Internet access”. There is no need to be scared - this is normal. Since the device is not configured, it does not have access to the global web! This does not affect access to the web configurator!

Step 2. Launch the web browser. You can use absolutely any browser, but I would still recommend using either Google Chrome or Microsoft Edge. Alternatively, Opera will do. But with Firefox, sometimes there are problems with the layout and operation of interactive elements,

Step 3. In the address bar where you usually write the website address, type the router’s IP address - http://192.168.1.1(or http://192.168.0.1 depending on what is indicated on its sticker). Press the “Enter” button. If everything is configured correctly and there are no problems, a window should appear with fields for entering your login and password, as in the picture above. Enter your login information to open the web interface. Typically used to log in to 192.168.1.1, login admin, password admin. Some D-Link models may not prompt you for a password. On Tenda routers, you may not be prompted for a username and password at all!