Windows 7 how to remove login password. If you suddenly forgot your Windows password: Break the password! Entering the computer BIOS

A password is the basis for the security of any system and helps to lock your computer from third parties intending to use it. By neglecting safety, you consciously take upon yourself all the possible consequences of your actions. It often happens that it becomes too annoying to enter a password, especially when you are the only owner of the computer. So how to remove the password when logging into Windows 7?

Before removing it, let's take a look at the advantages of such a system.

To achieve the desired result, you do not necessarily need to remove your password set for your account; there is the option to create a new account.

Thanks to these actions, you will be able to:

Be protected from unwanted computer use;
Log in to an unsecured account;
Protect your PC from the harmful actions of some viruses that cannot be executed without the required level of access.

Such an alternative exists, and in this article we will briefly consider it; read in more detail in the next publication. But first, we will perform actions related to the immediate topic of the article. To achieve the desired result, you will need access as an administrator and, of course, a password for recording during the procedure.

Disable Windows 7 login password requirement

1. Open the “Run” line, this is where administrator rights come in handy, without them you will not gain access, press Win + R;

3. You will be taken to the “User Accounts” window, below are all previously created user accounts, select the one you need and uncheck the “Require username and password” checkbox;

4. After this, apply the specified changes, you will be asked to enter the old password to confirm these actions.

There is also another method, it is almost identical to the previous one, except that it does not require you to use the command line to find the account settings window.

The method also differs in that you do not remove the requirement to enter a password before starting the system, but remove the password, thereby removing the need to ask for it.

How to remove a password?

The starting requirements are the same, access to the administrator account and the password for the desired account.

1. The most accessible way to get to the desired menu is to click on the picture indicating your avatar. In your current account, to do this, open “Start” and click on the picture, go straight to step 3;

2. This point has a right to life, because in some versions of themes used from third-party developers there is no such window, you should follow a different path:

Click on the Windows sign in the lower left corner, “Start” should open, select the “Control Panel” option;
Find, often at the bottom, “User Accounts” and click on it.

3. Go to the “Delete your password” tab;

4. Enter it in the empty line and click “Remove password”;

Another option similar to this could be: instead of deleting the code (point 3), go to “Change your password”, enter the outdated password, and leave the space for the new one empty, so there will simply be no password.

Sometimes the option does not work completely; the computer still asks you for a password when you log in, but allows you to access your account by simply pressing Enter, without a password. If you have such a problem, then use the first method by disabling the Windows feature that requires a password when logging in.

Creating a Windows 7 Account

1. Open the account settings menu as we just did and click “Manage another account”;

2. You will see a window with accounts that already exist, and at the bottom is the “Create an account” button, which is what you need;

3. 2 parameters are required: name and type, regular or administrator access;

4. After everything, click “Create an account” and you can use it.

Now, if you click the button that is located slightly to the left of “Shut down” in the “Start” menu, you will see a list of possible options for stopping the system; you need to click “Change user” and switch between them if necessary. When you start your computer, you can immediately go to the newly created entry.

On our website we already have a description of many functions that are relevant and useful for the user, based on this we will not dwell on this, but it is important to understand the differences between all methods. In the first case, you completely remove the password, in the second, you set an empty one, and in the third, you simply create a new account without a password, and leave the Administrator protected.

You need to understand that the most important system commands can only be executed on behalf of the Administrator.

If you still have questions on the topic “How to remove the password when logging intoWindows7?”, then you can ask them in the comments

If you have set a password for your account (the user under which you boot into Windows), but you don’t want to enter it every time, then you can disable password entry.

Before you disable password entry in Windows, it is important to understand that anyone who can approach your computer can also gain access to any data on it. But when accessing via the network, the password will still be valid.

This instruction is also useful if you created a new user, and Windows stopped automatically logging in with your user, stopping at the welcome screen. The instructions are valid for all modern versions of Windows (7-8-10)

Instructions for disabling password entry in Windows 7, 8, 10:

1. Click " Start", write in the search field " netplwiz" (without quotes), press the " key on your keyboard Enter"[you can also press the Win+R keys, in the "Run" window that appears, in the "Open" field, enter "netplwiz" or "Control Userpasswords2" without quotes and press "Enter"];

2. In the “User Accounts” window that appears, in the “Users on this computer” list select the desired username(the one you are running under in Windows);

3. Uncheck near the inscription “Require username and password”;

4. Click the button OK" and enter the password of the user selected in the second step twice;

We remind you that attempts to repeat the author’s actions may lead to loss of warranty on the equipment and even to its failure. The material is provided for informational purposes only. If you are going to reproduce the steps described below, we strongly advise you to carefully read the article to the end at least once. The editors of 3DNews do not bear any responsibility for any possible consequences.

Windows has long used the SAM system to store and manage all user passwords. All information in it is well protected, so in order to find out the password, you will have to spend a lot of time and resources, especially if it is quite complex. Most often, however, there is no need to find out the password at all - just reset it or change it. Several utilities have been developed for this, one of which we will use. Another important point is that, obviously, when the OS is running, it will not allow you to just break into the password storage. Therefore, you need to make sure that your computer supports booting from a CD/DVD or USB media in order to launch the necessary utilities.

The most famous of them is Offline NT Password and Registry editor, which can work with passwords and the registry of Windows XP/Vista/7. Download the USB or CD version of the utility, burn the downloaded image to disk, or use our tips for creating a multiboot flash drive. The utility does not have a graphical interface, but you shouldn’t be afraid of this - everything in it is quite simple and clear. In addition, the desired option is often offered by default, so you only need to press the Enter key.

Boot from removable media Offline NT Password and Registry editor. You are unlikely to need additional boot options, but in some cases you will have to empirically select those that will help the utility start. The next step is to select the partition number on which Windows is installed. You will have to navigate first of all by its size. In principle, until the very last moment the program does not make any changes to Windows, so in case of an error, you can simply start the password reset procedure again.

Then the utility will ask you to specify the path to the folder where the SAM files are located (in fact, this is a registry hive). The default is X:/Windows/System32/config, this is what the program offers at the beginning. Then you need to select the first item (Password reset), since we are going to reset the password.

Then everything is simple. Select the first item (Edit user data and password) and enter the user name or identifier in the format 0xabcd, Where abcd is the RID listed in the first column. RID is useful if the username is not displayed correctly or cannot be entered. For example, when using Cyrillic.

All that remains is to specify item 1 (password reset) or 2 (password change) for the selected user. Exit password editing mode by entering an exclamation point and pressing Enter.

Everything is almost ready. Enter q, press Enter, and then agree to the changes by entering y and pressing Enter again. We refuse to continue working in Offline NT Password and Registry editor ( n), remove the flash drive or CD and press the treasured combination Alt+Ctrl+Del to reboot. Done - the password is reset!

This was an easy way to reset your Windows 7 password. There shouldn't be any difficulties with it. You just need to be careful and careful. Problems can only arise if the necessary drivers for working with the hard drive are missing. Then you will have to put them on a floppy disk (if, of course, you find a living representative of this almost extinct species and a working drive for it) or on a USB flash drive and at the first stage select the fetch additional drivers item.

For the second and third methods, you only need the Windows 7 installation disk and nothing else. A more complex option involves enabling the initially hidden “Administrator” account by editing the registry from the Windows 7 installation environment. In the future, you can log in under this account and edit any other account in the OS. By default, “Administrator” does not have a password, which only plays into our hands.

So, boot from the installation disk and press Shift+F10 to open the command line, where we enter regedit and press Enter to launch the Registry Editor.

Selecting a section HKEY_LOCAL_MACHINE, and in the menu select “File” → “Load hive...” (File → Load hive...). We need to open the SAM file, which is located in the folder \Windows\System32\config on the partition where Windows 7 is installed. When opening, you will be asked to enter the name of the hive to load - enter any.

Now you need to select a section HKEY_LOCAL_MACHINE\hive_name\SAM\Domains\Account\Users\000001F4 and double click on the key F. An editor will open in which you need to go to the first number in line 038 - this is 11. It must be changed to 10. Be careful and do not make a mistake - you only need to change it, without adding or deleting other numbers!

Now we need to select our bush HKEY_LOCAL_MACHINE\hive_name\ and in the menu select “File” → “Unload hive...” (File → Unload hive...), and then confirm unloading the hive.

That’s it, you can reboot by removing the pre-installation disk and log in under an administrator account. In the Windows Control Panel, under User Management, you can change the settings of another account. Including changing the password.

There is one last way left, the wrong one. Why wrong? Because we will deal with replacing system files, and this is a ignoble matter. What is the main idea? It's simple - the OS has the function of detecting sticky keys enabled by default. You've probably encountered it at least once, and if not, just quickly press Shift at least 5 times, and you will see this wonderful window:

This window belongs to a small auxiliary program sethc.exe, which is located in the Windows system directory. Moreover, it even starts on the welcome screen, when you are asked to select a user and enter a password. But it can be replaced with something useful. Eg, cmd.exe. Naturally, not directly in the running OS, but by booting from the Windows 7 installation disk and pressing Shift+F10.

You need to start by identifying the drive letter on which Windows is installed. The easiest thing is to simply view the contents of the root partition with the command dir. C: will most likely be seen as D:, but not necessarily.

Having decided on the volume letter, we execute two simple commands - with one we copy the original file, just in case sethc.exe to the root of the disk or wherever you like, and change the second one to cmd.exe.

Copy d:\windows\system32\sethc.exe d:\copy d:\windows\system32\cmd.exe d:\windows\system32\sethc.exe

We reboot, quickly press the Shift key (or Ctrl, or Alt) several times and observe the command line window. You need to enter another command in it, substituting the name of the desired user and a new password accordingly. Other options for this command can be found in the official help.

Net user username new password

If you want to return everything to normal, you need to boot from the installation disk again, open the console and run the command:

Copy d:\sethc.exe d:\windows\system32\sethc.exe

However, you don’t have to restore anything, but leave this little trick in the system just in case. In addition to the methods listed above, there are many other methods for resetting or recovering a password in Windows, but we will not consider them now. Once again we urge our readers to be attentive and careful when working with the internals of the OS, and even better not to bring the situation to a “surgical” intervention in SAM. Good luck restoring access to your accounts!

A login password is a good way to protect important files from strangers. This article will help you set or remove a password for logging into the system, as well as completely reset it if you forgot it using a special flash drive.

Setting a password on Windows 7

Even a simple combination of numbers is a guarantee that very young family members or work colleagues will not have access to information that is important to you. Creating a password is not difficult - the OS itself will help us with this.

First you need to turn on your computer and log into your account, which you need to protect with a password. To set a password, you need:

Go to menu "Start" → click on the user icon (a window will open "User accounts" );

Figure 1. Click on the user icon.

In the window that appears, select the item “Creating a password for your account” → install password, re-enter it in the column "Password confirmation" , come up with and write down “Password hint” → save changes with a click of a button "Create a password" ;

Figure 2. Enter a new password.

Restart your computer to make sure the steps are correct.

Ready.

These two simple steps will help protect your files.
If you want to change or remove your password, please read the next chapter. Be prepared that in order to reset your password, you may need to spend a lot of time at the computer, and you may also need special equipment.

Password reset with proper skills available.

Therefore, if you are seriously concerned about the safety of your information, set a password on the BIOS. Instructions can be found in the chapter "".

Change or delete your account password (if you remember it)

These actions are no more complicated than those described in the previous chapter.
We will consider two situations: when you remember the password (further in the text), and when you forgot it (see chapter).

To remove or change the secret code, you need to:

Enter "Start" → click on the icon (located in the upper right corner above the name of the current account);
Now in the window "User Accounts" select the item you need: "Change…" or "Deleting your password" ;
Settings will open with fields that need to be filled in. You need to enter a new password, a confirmation hint for it (or the old one, if you are deleting it) → click on the button "Change password" (or "Remove password") .

Figure 3. Changing/removing the password.
Ready.

Now it is advisable to write down the new password and save it in a safe place. After reading this chapter, questions might arise if:

You have completely forgotten your password and want to view it or delete it;
You are looking for a more reliable way to protect your data than standard means.

Then check out the chapters that provide instructions on how to recover your password (even if you have forgotten it) and “Bonus” with installation steps.

Complete password removal on Windows 7

This chapter contains information on completely resetting the password for absolutely any account.

For this you will need flash drive and a working (with the ability to log into the OS) computer. Attention!
All further actions must be agreed upon with the owner of the account/computer.Let's begin.

Step 1. Preparing a flash drive.

First you need to clean the drive.

To do this in the folder "My computer" you need to right-click on the flash drive and select “Format...” → file system: « FAT 32" → "Begin" .

Wait for the process to complete.
Figure 4. Formatting our flash drive.
Step 2. Download the required program to reset your password.

Everything is simple here: (archive is attached at the end of the article) → unpack to any convenient place → copy files to the root of the flash drive.

Step 3. Assign the status of the drive to boot.

This can be done using standard system tools - using command line (CMD) .

To do this you need:

Open "Start" → enter the query in the search bar: “cmd” → open the corresponding item using the right mouse button (required!) → “Run as administrator” (a black command console will launch);

Figure 5. Open the command console with administrator rights.

Next you need to enter the command: "G: syslinux. exe- maG:» (instead of “G” in both cases, use the letter of your flash drive, which can be found in the window "My computer");
The operation must take place no mistakes. You can now close the command prompt. If errors still occur, repeat the steps starting from "Step 1".

Figure 6. We get a seemingly “zero result.”
Step 4. We start the computer from a bootable USB flash drive. Executing this step depends in part on your motherboard/laptop model. We need to set our drive to priority in Setup Menu (BIOS) or Boot Menu→ turn off the computer on which we plan to recover the password and:

Enter BIOS by pressing the F1/F2/F12/Delete button (depending on the motherboard);

If you don't know how to enter the BIOS on your computer or laptop, then...

Go to tab « Boot » (navigation is carried out using arrows on the keyboard);
Install the bootable USB flash drive yourself first in line « Boot priority ( order )» / « Boot device priority »
Save changes to tab « Exit » (« Save & Exit ») selecting an item « Exit Saving Changes » → confirm by pressing « Yes » .

The computer should automatically boot from the flash drive

Step 5. Removing the password.

First, you need to wait until the program is completely loaded (time 2 minutes if you are not sure). Enter the following commands sequentially without quotes(relevant for most users):
The following steps are also suitable for resetting the administrator password.

Click « Enter » ;
"C:\Windows\System32\config" – access to the register;
"Password Reset » – launching a complete password removal script;
Enter Username whose password needs to be reset;
« Clear User Password » – clearing the password from the registry
«!» – just an exclamation point;
Press a key on the keyboard "Y" .

Now you need to restart your computer if this does not happen automatically. The login password will disappear and you will be able to continue using the OS. Don't forget to write down the new combination on a piece of paper to avoid similar troubles in the future. The following is information about the most reliable (standard, of course) method of keeping data on a computer practically invulnerable to hacking - installing protection in the BIOS.

Bonus. Setting a BIOS password

This password cannot be reset using a regular bootable USB flash drive. To remove this type of protection, you need to “examine” the computer hardware. Extract only CMOS can restore BIOS to factory settings (including clearing the password) if you forget the data from entering the Setup Menu of the computer. To install such protection, you need:

Go to BIOS(this is done by pressing the F1/F2/F12/Delete button);
Find by tabs (usually « Security» or « Main» ) paragraph « Set User Password » (or « Bios Setting Password» ) → select by pressing the key « Enter » ;
Enter a new password → « Enter » .

Figure 7. Create a new password.

The protection is now installed only to enter the BIOS, and you need to make sure that the password is requested every time you start the computer. To do this, you need to find the item in the menu « Password Check » → set its value to “Always”;
Save your password by selecting « Save and Exit Setup » (can be located either in the general tab or in « Exit » ).

Ready.

The most secure protection is installed. Without access to the BIOS, outsiders will be able to do literally nothing. Be sure to write down your password so you don't accidentally forget it, and put it in a safe place.

Before removing it, let's take a look at the advantages of such a system.

To achieve the desired result, you do not necessarily need to remove your password set for your account; there is the option to create a new account.

Thanks to these actions, you will be able to:

Be protected from unwanted computer use;
Log in to an unsecured account;
Protect your PC from the harmful actions of some viruses that cannot be executed without the required level of access.

Disable password requirement when logging in Windows 7

1. Open the “Run” line, this is where administrator rights come in handy, without them you will not gain access, press Win + R;

3. You will be taken to the “User Accounts” window, below are all previously created user accounts, select the one you need and uncheck the “Require username and password” checkbox;

4. After this, apply the specified changes, you will be asked to enter the old password to confirm these actions.

How to speed up a Windows 7 laptop?

There is also another method, it is almost identical to the previous one, except that it does not require you to use the command line to find the account settings window.

The method also differs in that you do not remove the requirement to enter a password before starting the system, but remove the password, thereby removing the need to ask for it.

How to remove a password?

The starting requirements are the same, access to the administrator account and the password for the desired account.

2. This point has a right to life, because in some versions of themes used from third-party developers there is no such window, you should follow a different path:

Click on the windows sign in the lower left corner, “Start” should open, select the “Control Panel” option;
Find, often at the bottom, “User Accounts” and click on it.

3. Go to the “Delete your password” tab;

4. Enter it in the empty line and click “Remove password”;

Creating a windows 7 account

1. Open the account settings menu as we just did and click “Manage another account”;

How to choose a computer mouse?

2. You will see a window with accounts that already exist, and at the bottom is the “Create an account” button, which is what you need;

3. 2 parameters are required: name and type, regular or administrator access;

4. After everything, click “Create an account” and you can use it.

You need to understand that the most important system commands can only be executed on behalf of the Administrator.

However, you can create another account with administrator rights, so they will have equal rights to access and edit content. Be careful and do not give them without the proper level of trust, because this will make your computer more vulnerable. If you still have questions on the topic “How to remove the password when logging into Windows 7?”, you can ask them in the comments

Was the material useful to you? Leave your review or share on social media. networks:

(1 ratings, average: 5.00 out of 5) Loading...

tvoykomputer.ru

Forgot your Windows 7 login password? No problem! This article will help you reset it!

Good day, dear readers, Denis Trishkin is in touch again.

In the latest versions of operating systems from Microsoft, for security purposes, it is possible to set a password to enter the work area. If this tool is no longer relevant, you can disable it. I will tell you how to remove the password in Windows 7 in several ways. After all, constantly entering secret characters sooner or later gets boring. This is especially irrelevant when only one person is working at the computer.

Why do you need a password? (to contents)

Many users store information on their computer that only they should have access to. If only one person uses the device, this is not a problem. But in the case when another may approach him, certain difficulties may arise.

Windows provides a special tool that restricts access to data by setting a personal key. For example, parents often use this tool to prevent their children from seeing content they are not supposed to see. In addition, this way you can protect yourself from changing your personal settings.

Disable password(to content)

There are several ways to turn off key entry. Each of them assumes that you are the owner of the account that needs to be updated. The first means that the password is known and the user has administrator rights.

It allows you to quickly deal with this problem:

That's all. Now, when the system starts, you will not be prompted to enter a secret key.

Important! However, if you change your account or go to the lock screen, you will still need to enter your password.

You can remove the annoying function using the standard “User Accounts” menu. True, in this way it will not be a shutdown, but a complete deletion. Despite this, Password will not be asked under any circumstances, even after resuming from sleep mode.

To disable the protection tool, do the following:

That's it, now the system will not ask “stupid questions” regarding security in this area. Here you can also create a secret combination of symbols.

Interesting to know! When installing a key, experts recommend entering large and small letters in different languages and also adding numbers. The length must be at least six characters. Only in this option can at least some security be guaranteed.

Resetting the network key (to contents)

Probably all computer users know what a network is. It is a connection between two or more devices that allows the exchange of information. The younger generation is familiar with this concept, as games can be played together through this method.

But what should you do if, after connecting the machines, a window appears to enter the network password? Moreover, if it does not exist, confirming an empty string will not lead to the desired result.

The fact is that Windows 7 provides new security tools, and therefore several conditions must be met to log in:

Use classic settings on all devices.

If all this is done, then you will not need to enter secret characters.

Resetting the administrator password (to contents)

Sometimes situations happen when, under some circumstances, you simply forgot the password with which you can get to your desktop, and generally gain access to personal data. This often happens when a user constantly works on multiple devices. And if the passwords on them are not written down anywhere, then it is quite possible to confuse them.

There are several solutions. The first thing you can do is spend some time on selection. Alternatively, simply remove the system from your computer and install a new one. But in this case, the data that was on the system disk will be lost. And it’s not a fact that they can be restored, although methods exist.

But there is a safer way - a bypass, which I want to talk about. To do this, you will need an installation disk or flash drive with Windows. It is important to note that the operating system must be exactly the same. For example, if the Ultimate version is installed, then the same is true on a portable device.

So, if everything is found and prepared, you can proceed:

After the work has been done, a command line will appear while the OS is loading. Here we can change the password. To do this, enter “net user user password” in the line. We confirm the action. Example command: “net user admin 1111”.

Using this method, we changed the password for the user “admin” to “1111”. Now, in the window provided, we enter our treasured numbers and wait for the download.

Password reset via SAM file (to contents)

There are many ways to bypass the login security system. Despite this, they all only change the information that is stored in the SAM file. It contains all the necessary data related to User-Password links.

It is worth noting that this file does not have a special extension. The fact is that it is a registry component. It can be found in the “windows\system32\config” folder, which is located on the system drive.

It is also important to note that this method is considered one of the most difficult. Nevertheless, I consider it necessary to tell it to you. To work we need a special program. At the same time, each step must be performed with extreme caution, because this can radically change the entire process.

We will use Active password changer. In addition, we will need a clean flash drive.

So, to remove the password prompt, you need to:

If everything goes as it should, no problems should arise in the future, since only the components we need change in the system area.

The only downside is that some relatively older motherboards may not support starting with portable memory. In this case, you can use a plastic disk.

Well, as you can see, there are several different ways to remove or change your account password. At the same time, they are absolutely simple, you don’t even need to watch the video. By strictly following the instructions, everyone will be able to gain access to the necessary information.

I hope everyone here will find an option that will help them cope with the problem. Subscribe and tell your friends about me!

windwix.ru

How to remove the password when logging into Windows 7.8, etc.?

Good time friends! Yesterday I was asked by email how to remove the password when logging into Windows 7 or 8? Well, as usual, I decided to write an article about this and tell you the same thing. In order to secure the use of Windows 7, the user can enable password entry at startup. If you no longer require this option, you can cancel the required password field. So, first you need to select an account, which will be automatically loaded upon activation of the PC. Along with this, administrator rights are required. Let's take a closer look at how to do this.

In order to remove the password when logging into Windows, first enter a special directive on the command line.

To do this, press the key combination “Win + R”, after which you will see a window for entering commands. You should also enter “control userpasswords2” here and confirm your intentions by clicking on the “Ok” button.

Disable the mandatory password entry.

You will see a control window where you can manipulate accounts in every possible way. We select the desired user who will be activated automatically, then uncheck the box “Require entering a name ...” and click on the “Ok” button.

We confirm our actions.

The window that appears will show the account that is loaded by default when you turn on the PC. In addition, if she already has a password, you must enter it. It will be saved and will be entered automatically when the OS is activated. If you wish, you can remove it completely.

On a note! I want to tell you something, friends, to receive my articles directly to your email - you just need to enter your email address at the end of the article in the box and then confirm your subscription in the letter. I will also be grateful if you read articles on the topic of how to reduce the screen brightness on a computer or how to disable sleep mode in Windows 7. I also told you how to permanently delete a VKontakte page and how to turn on Bluetooth on a laptop.

That’s it for all my friends, I hope you now know how to remove the password when logging into Windows 7 or 8. If something doesn’t work out for you, you can write to me in the comments and I will definitely help everyone. Don't forget to like and say thank you in the comments on VKontakte. I wish everyone only positive emotions for the next month)))

With UV. Evgeny Kryzhanovsky

public-pc.com

How to set a password on Windows, remove it and reset it if you suddenly forget

Please note: To follow most of the instructions in this article, you must use a local Windows account with administrator rights.

How to set a password on a Windows computer

If other people have access to your computer, it is wise to protect Windows with a password. This way, your settings and data will be safe: without special knowledge, no one will be able to view or change them. Windows will ask for a password when you turn on the computer, when you change your account, or after resuming from sleep mode.

How to set a password on Windows 10

Open Start → Settings (gear icon) → Accounts → Sign-in options.
Click "Add" under "Password".
Fill in the fields according to the system prompts and click “Finish”.

How to set a password on windows 8.1, 8

In the right sidebar, click Settings (gear icon) → Change PC settings. In the menu of the window that opens, select “Accounts” (or “Users”), and then “Login Options”.
Click on the “Create Password” button.
Fill out the fields, click “Next” and “Finish”.

How to set a password on windows 7, Vista, XP

Open the section “Start” → “Control Panel” → “User Accounts”.
Select the desired account and click “Create a password” or immediately click “Create a password for your account.”
Fill in the fields using the system prompts and click on the “Create password” button.

How to remove the password when logging into Windows of any version

If strangers do not have physical access to your computer, it may be better to disable protection. This will eliminate the need to enter a password every time the system starts.

Use the windows + R key combination and enter netplwiz (or control userpasswords2 if the first command does not work) at the command line. Press Enter.
In the window that opens, select in the list the account for which you want to remove the password, and uncheck the box next to “Require username and password.” Click OK.
Enter the password, confirm it and click OK.

Windows will stop asking for a password only when you turn on the computer. But if you lock the screen (windows keys + L), log out, or the computer goes into sleep mode, the password prompt will still appear on the display.

If the “Require username and password” option is unavailable or you want to completely remove the Windows password rather than disable it, try another method for more experienced users.

To do this, open the account management section using one of the instructions at the beginning of this article.

If the open section says that you are using a Microsoft online profile (sign in with email and password), disable it. Then use the system prompts to create a local profile, but do not fill out the password fields during the process.

After you disable your Microsoft account, the system will no longer sync your settings and files across different computers. Some applications may refuse to work.

If the local profile is initially active in the account management menu, then simply change the current password, leaving the fields for the new password empty.

If you delete an old password, the system will never prompt you for it until you add a new one.

How to remove the password when waking up from sleep mode

If you disable the password prompt when Windows starts, the system may still prompt you for it when you wake up. But you can deactivate this feature separately using these instructions.

How to remove password on wake up in windows 10, 8.1, 8, 7 and Vista

In the search bar in Windows, enter “Power Options” and click on the found link to the section with the same name. Or find it manually through the Control Panel.
Click "Require a password when you wake up," then "Change settings that are currently unavailable" and check the "Don't ask for a password" checkbox.
Save your changes.

How to remove password when waking up windows XP

Open the “Control Panel” → “Power Options” section.
In the window that appears, open the “Advanced” tab and uncheck the box next to “Require a password when exiting standby mode.”
Save your changes.

How to reset a password on windows of any version

If you have forgotten your password and cannot log into your local Windows administrator profile, there is no need to reinstall the OS. There is a simpler solution: resetting the password protection. To do this, you will need another computer, a USB drive, and a free password reset utility.

Create a bootable USB flash drive on another PC

Download the Lazesoft Recover My Password installer onto any available computer.
Run the downloaded file and complete the installation.
Connect the flash drive to your computer. If necessary, make a copy of the files stored on it, since all information will have to be deleted.
Open Lazesoft Recover My Password, click Burn Bootable CD/USB Disk Now! and create a bootable USB flash drive using the program prompts.

Boot your computer using a flash drive

Insert the prepared USB drive into the computer for which you have forgotten the password.
Turn on (or restart) the PC and, as soon as it starts to boot, press the key to go to the BIOS settings. Usually this is F2, F8, F9 or F12 - depending on the equipment manufacturer. Most often, the required key is displayed on the screen while loading the BIOS.
While in the BIOS menu, go to the Boot section if the system does not redirect you there right away.
In the Boot section, install the USB flash drive to the first place in the list of devices that appears on the screen. If you don't know how to do this, look around - there should be some control tips nearby.
Save your changes.

If the BIOS is also protected by a password that is unknown to you, then you will not be able to reset windows password protection using Lazesoft Recover My Password.