How to set a password on a computer with any version of Windows. How to set a password on a laptop - step-by-step instructions How to create a user group

If there is a question about whether or not to install protection on your computer, then the answer should be obvious. Who would like it if their personal information on their computer became available to everyone? Moreover, even relatives can come up and inadvertently disable important programs and services. To protect yourself not only from the actions of intruders, but also from banal and absurd accidents, it is better to set your Windows password once and for all.

It is also possible to set a special code combination for each user. This way no one will be offended, and everyone will have their own installation of the operating system with the required programs. Setting a password is a standard procedure that increases the security of every computer system. It is enough to read any manual, and you will immediately discover that setting passwords is the very first setting that the computer owner must create.

Settings

So, in order to put some entry code in Windows 7, you need to perform certain actions. There is nothing complicated about this, it’s just that an untrained eye is unlikely to be able to figure out what’s what. It's great that the Internet is full of instructions.

First you need to open the Start menu and go to Control Panel. This menu is opened by clicking the icon at the bottom left of the screen or the Win button on your keyboard, which is indicated by Windows tiles.

A list will open containing many system settings. Let's scroll through these items and find Adding and deleting user accounts. Click on this item and look further.

A special window will appear here, listing all users of this computer. Click on the character for which you need to create a password. In the case where several people use the computer, each person needs to create their own password.

A list of actions that can be performed on a specific user account will open. You need to hover your mouse over the Create a password field and click on it.

The new menu will prompt you to enter the password in special Windows 7 fields several times so that no errors are detected. It is important to set a hint that the system will ask if the user accidentally forgets the password. After this procedure, click Create a password and wait.

That's all, I succeeded in password-protecting Windows. Now, after the next download, a special window will appear that will invite the user to enter the key. As you know, if you set such a restriction on logging into the system, there are no simple methods to bypass it. Of course, it is possible to make this window reset from booting via USB with the Linux operating system. But this is only possible for advanced guys who can at least install Linux on a memory card. – this is the most reliable setting for safe and correct work in the computer field.

(Visited 236 times, 1 visits today)

Necessity. But first, let’s answer the question - why do you need a password on a PC and when can it come in handy? What can he protect us from?

If you install it on Windows 7, it can protect you from many troubles:

will not allow someone else, without knowing the code for the operating system, to use your computer.
needed for the security of your personal or business information located on hard drives when you are not around.
will limit the time your children spend on the computer while you are not at home.
serves as the first step in protecting your machine from viruses.

Installing it will undoubtedly be useful.

How to place it correctly

Or a laptop with Windows 7 installed is not at all difficult using a user account. As a rule, almost all home machines and devices from small companies that are not concerned about information security use only one user account. It usually has your name and gives you full administrative rights for that computer. Thus, if we turn on a computer or laptop and log in under this account, we will be able to view all the files on the disk, documents, photos. And not only look, but also delete. It also gives all rights to install and remove any programs. Both useful and not very useful. It is on this main account that we will provide protection for you in such a way that when you turn on the device without entering a password, you will not be able to access data, install or delete the application.

Sequencing

So, setting a password on the Windows 7 operating system of your PC is not difficult at all. To do this, you need to perform certain actions in the sequence listed below.

First you need to click the “Start Menu” button (the check mark on the button in the left corner at the bottom of the desktop), then go to the “Control Panel” menu item. In the future, for brevity, this sequence of actions will be written as follows: “Start Menu - Control Panel -...”

A window with control panel elements will open; we will need to change its appearance a little. To do this, in the right corner of the folder you need to change the display type in the “View” item from “Category” to “small icons”.

The Windows window view has changed to full, listing all control panel elements.

We need the “User Accounts” item - look for it and go in by clicking on it once.

A user account management window will open, which is called “User Accounts”. Here we need to select the “Create a password for your account” link.

This step is one of the most important. You need to come up with a set of characters. To be more secure, it should be difficult for humans or malware to pick up. It is better if capital letters, numbers and special characters are used along with lowercase letters. For example, "Got5%4". The more symbols, the more reliable, but don’t get too carried away - usually 8-10 symbols are enough. It should be noted that passwords like “123” or “qwerty” and the like can only protect against a child, and not for long. In the future, he will definitely pick it up and use your computer uncontrollably. Moreover, a simple password will not protect against intruders or malware.

We came up with it and entered it twice the same way to confirm and put it, repeating it in the appropriate input fields. If you wish, you can enter a hint for it, but you should not write it there explicitly, especially since Windows 7 itself will not allow you to do this. After you write everything, click the “Create password” button and now you can finally set it.

Now your PC user account is under good protection - a password has been set, about which the corresponding message “Password protected” is displayed. Now you can either change it or delete it completely. Then, every time you turn on, when loading Windows 7, the system will require you to enter the necessary characters; without this, you will not be able to log in to the system under your account.

That's it, a password has been set for your Windows 7 computer.

A login password is a good way to protect important files from strangers. This article will help you set or remove a password for logging into the system, as well as completely reset it if you forgot it using a special flash drive.

Setting a password on Windows 7

Even a simple combination of numbers is a guarantee that very young family members or work colleagues will not have access to information that is important to you. Creating a password is not difficult - the OS itself will help us with this.

First you need to turn on your computer and log into your account, which you need to protect with a password. To set a password, you need:

Go to menu "Start" → click on the user icon (a window will open "User accounts" );

Figure 1. Click on the user icon.

In the window that appears, select the item “Creating a password for your account” → install password, re-enter it in the column "Password confirmation" , come up with and write down “Password hint” → save changes with a click of a button "Create a password" ;

Figure 2. Enter a new password.

Restart your computer to make sure the steps are correct.

Ready.

These two simple steps will help protect your files.
If you want to change or remove your password, please read the next chapter. Be prepared that in order to reset your password, you may need to spend a lot of time at the computer, and you may also need special equipment.

Password reset with proper skills available.

Therefore, if you are seriously concerned about the safety of your information, set a password on the BIOS. Instructions can be found in the chapter "".

Change or delete your account password (if you remember it)

These actions are no more complicated than those described in the previous chapter.
We will consider two situations: when you remember the password (further in the text), and when you forgot it (see chapter).

To remove or change the secret code, you need to:

Enter "Start" → click on the icon (located in the upper right corner above the name of the current account);
Now in the window "User Accounts" select the item you need: "Change…" or "Deleting your password" ;
Settings will open with fields that need to be filled out. You need to enter a new password, a confirmation hint for it (or the old one, if you are deleting it) → click on the button "Change password" (or "Remove password") .

Figure 3. Changing/removing the password.
Ready.

Now it is advisable to write down the new password and save it in a safe place. After reading this chapter, questions might arise if:

You have completely forgotten your password and want to view it or delete it;
You are looking for a more reliable way to protect your data than standard means.

Then check out the chapters that provide instructions on how to recover your password (even if you have forgotten it) and “Bonus” with installation steps.

Complete password removal on Windows 7

This chapter contains information on completely resetting the password for absolutely any account.

For this you will need flash drive and a working (with the ability to log into the OS) computer. Attention!
All further actions must be agreed upon with the owner of the account/computer.Let's begin.

Step 1. Preparing a flash drive.

First you need to clean the drive.

To do this in the folder "My computer" you need to right-click on the flash drive and select “Format...” → file system: « FAT 32" → "Begin" .

Wait for the process to complete.
Figure 4. Formatting our flash drive.
Step 2. Download the required program to reset your password.

Everything is simple here: (archive is attached at the end of the article) → unpack to any convenient place → copy files to the root of the flash drive.

Step 3. Assign the status of the drive to boot.

This can be done using standard system tools - using command line (CMD) .

To do this you need:

Open "Start" → enter the query in the search bar: “cmd” → open the corresponding item using the right mouse button (required!) → “Run as administrator” (a black command console will launch);

Figure 5. Open the command console with administrator rights.

Next you need to enter the command: "G: syslinux. exe- maG:» (instead of “G” in both cases use the letter of your flash drive, which can be found in the window "My computer");
The operation must take place no mistakes. You can now close the command prompt. If errors still occur, repeat the steps starting from "Step 1".

Figure 6. We get a seemingly “zero result.”
Step 4. We start the computer from a bootable USB flash drive. Executing this step depends in part on your motherboard/laptop model. We need to set our drive to priority in Setup Menu (BIOS) or Boot Menu→ turn off the computer on which we plan to recover the password and:

Enter BIOS by pressing the F1/F2/F12/Delete button (depending on the motherboard);

If you don't know how to enter the BIOS on your computer or laptop, then...

Go to tab « Boot » (navigation is carried out using arrows on the keyboard);
Install the bootable USB flash drive yourself first in line « Boot priority ( order )» / « Boot device priority »
Save changes to tab « Exit » (« Save & Exit ») selecting an item « Exit Saving Changes » → confirm by pressing « Yes » .

The computer should automatically boot from the flash drive

Step 5. Removing the password.

First, you need to wait until the program is completely loaded (time 2 minutes if you are not sure). Enter the following commands sequentially without quotes(relevant for most users):
The following steps are also suitable for resetting the administrator password.

Click « Enter » ;
"C:\Windows\System32\config" – access to the register;
"Password Reset » – launching a complete password removal script;
Enter Username whose password needs to be reset;
« Clear User Password » – clearing the password from the registry
«!» – just an exclamation point;
Press a key on the keyboard "Y" .

Now you need to restart your computer if this does not happen automatically. The login password will disappear and you will be able to continue using the OS. Don't forget to write down the new combination on a piece of paper to avoid similar troubles in the future. The following is information about the most reliable (standard, of course) method of keeping data on a computer practically invulnerable to hacking - installing protection in the BIOS.

Bonus. Setting a BIOS password

This password cannot be reset using a regular bootable USB flash drive. To remove this type of protection, you need to “examine” the computer hardware. Extract only CMOS can restore BIOS to factory settings (including clearing the password) if you forget the data from entering the Setup Menu of the computer. To install such protection, you need:

Go to BIOS(this is done by pressing the F1/F2/F12/Delete button);
Find by tabs (usually « Security» or « Main» ) paragraph « Set User Password » (or « Bios Setting Password» ) → select by pressing the key « Enter » ;
Enter a new password → « Enter » .

Figure 7. Create a new password.

The protection is now installed only to enter the BIOS, and you need to make sure that the password is requested every time you start the computer. To do this, you need to find the item in the menu « Password Check » → set its value to “Always”;
Save your password by selecting « Save and Exit Setup » (can be located either in the general tab or in « Exit » ).

Ready.

The most secure protection is installed. Without access to the BIOS, outsiders will be able to do literally nothing. Be sure to write down your password so you don't accidentally forget it, and put it in a safe place.

The security of your home or work PC is an important issue that should not be overlooked. Each user stores a large amount of information on their device, which may be confidential.

A simple way to avoid leakage and protect your privacy is to use a password, which is provided in every version of Windows.

Why set a password

The personal computer has long become a repository of personal information - documents, photos or videos. It can also store more important things, such as passwords to various Internet accounts, contact lists, personal bank account numbers and other data not intended for prying eyes. A simple and reliable way to protect them is to set a passphrase to log into your computer.

Installation Methods

The main ways to set a password are:

installation via control panel;
installation using the local users and groups menu;
use of third party software.

Photo: password entry field when starting the PC

It is worth noting that there are a great many ways to set a password on a PC. To do this, you can use both the resources available in the device and use other features - third-party programs.

What to give preference to? More reliable and secure, of course, is to use your own PC software, which reduces to zero the risk of infecting your computer with viruses or spyware, which often accompany programs from unverified publishers.

Via control panel

Let's look at the first and easiest way to install protection when logging in.

By following these step-by-step instructions, any user can quickly complete this task:

Open the settings window

This menu in Windows 7 is a settings window that will help you create a code combination. You must enter it twice to eliminate the possibility of error and then confirm your choice by clicking “Create a password.”

Setting a password

it must consist of at least 8 characters, combine numbers and letters in upper and lower case;
be well remembered for the user himself, but at the same time remain heavy so that outsiders cannot “guess” it;
It is better to avoid using names and significant dates, because these are the first things hackers pay attention to;
You should not use whole words, as well as passwords that have already been set previously;
the ideal option is a random sequence of symbols specially learned for this purpose.

When creating a password, the system will also prompt you to select a hint for it. This is any phrase, question or numerical combination that will help you remember it and restore it if necessary. It will be visible to any user who has access to the computer, so you should be careful when choosing it, not making the answer too obvious.

Video: Windows password

Password created

After all the above steps, the computer is finally protected. Now, when you launch it, a special window will appear that verifies the user’s identity. As we can see, setting a password on a Windows 7 computer when turning it on is quite simple. In the account creation menu, you can also set its name, select an avatar from the list, or upload your favorite image from your hard drive.

How to set a password on Windows 7 - through Local users and groups

Windows has the ability to create not only individual users and passwords for them, but also groups with the same capabilities. A specific group can include multiple accounts registered on a computer.

You can create a single password for them, as well as assign or limit rights on the device. This feature is widely applicable on office PCs that are used by several people at once.

To create a group you need:

Important! Creating user groups is not supported by some versions of Windows 7: Starter, Home Basic, and Home Premium.

This simple and quick procedure will help protect the user account on a personal computer or laptop.

The most important thing is that it is quite simple and does not require much knowledge of software. Just a couple of steps and the data on your PC will not fall into the wrong hands.

Setting a password for the Windows operating system is an important step when organizing protection against data leakage. In addition, any user restrictions regarding access to data automatically become restrictions for viruses, as they prevent their spread. The sequence of actions for organizing protection for different versions of Windows OS is similar, but nevertheless there are some differences. In addition to instructions on how to set a password on a Windows XP, 7, 8, 10 computer, in this instruction you can find information on protecting the BIOS and individual files.

Windows XP protection

Password on Windows XP installed in section Control panels PC « User Accounts" Let's consider the sequence of actions:

After this, all attempts to log into the custom account will lead to the appearance of an input dialog for the specified sequence.

Windows 7 protection

The answer to the question of how to put Windows 7 password, is quite simple:

After the next exit from the PC operating system, an attempt to boot it under the control of this user will result in an authorization dialog appearing.

Windows 8 protection

The problem of how to set a password on Windows 8 is solved somewhat differently:

Windows 10 protection

Now let's look at how to set a password on Windows 10. This task can be solved in just four steps:

Windows Phone Protection

Setting up protection on a smartphone running Windows is not as easy as setting a password on Windows 10 for PC, but carefully following these steps will solve this problem:

It is important to understand that too small a value will prevent you from using the phone comfortably, and too large a value will negatively affect the reliability of the protection. Recommended length is 8–10 characters.

BIOS protection

The question often arises of how to set a password on a computer without logging into Windows 7, 8 or 10. This opportunity is provided by BIOS. The main advantage of using it to organize protection is that the user must enter the code sequence immediately after turning on the computer, and only a hardware reset of the BIOS will help an attacker bypass the lock.

Activating password login begins with entering the BIOS. To do this, press the Del key immediately after turning on the PC. Perhaps your BIOS version uses a different key for this, but in any case it should be indicated on the computer startup screen. There are many BIOS versions, but the names of the main sections are the same in almost all of them.

Let's look at the sequence of actions to set a password:

Locking shortcuts

Many users of desktop operating systems have a question about how to put a password on a shortcut or folder. There are many solutions to this problem, since in these cases you should use external programs such as LocK-A-FoLdeR, WinRaR, Folder Lock.

Bottom line

So, in this article we have studied in detail how to set a password on a Windows 10 computer, as well as on computers or laptops with previous versions: 7, 8 and XP. We looked at the procedure for installing protection on Windows Phone. They also showed how to install protection at the very beginning of booting your PC when starting the BIOS. We hope you find this article useful.